|
|
|
|
|
|
|
|
|
|
| Specifications-RS232 |
| RS-232 Type Controller |
| Circuit Board Dimension |
20mm x 75mm (0.79inches x 2.95inches)----(4-Wire ) |
| |
20mm x 75mm (0.79inches x 2.95inches)----(5-Wire ) |
| Power Requirements |
D.C.+5V (100mA typical,50mV peak to peak |
| |
maximum ripple and noise) |
| Operating Temperature |
0 to 50 ℃ |
| Storage Temperature |
-40 to 80 ℃ |
| Relative Humidity |
95% at 60 ℃ |
| Interface |
Bi-directional asynchronous RS-232 serial |
| |
communication |
| Protocol |
No parity,8 data bits,1 stop bit,9600 baud(N,8,1,9600) |
| Report rate |
Max. 160 points/sec |
| Pin out definition |
4 wire model: X+, Y+, X-, Y-
5 wire model: UL, UR, COM, LR, LL |
| Panel resistance |
4 wire model: 300 ~ 900 ohm ( pin to pin on the same layer )
5 wire model: 50 ~ 200 ohm ( pin to pin on drive layer ) |
|
Attached Cable |
6' shielded cable with 9-pin D-sub connector |
| |
for serial port |
| Regulatory Approvals |
FCC-B ,
CE , Unaffected by EMI from other nearly CRTs and other display devices. |
| EMI |
Unaffected by environmental EMI |
|
|
|
|
Drawing of Controller: |
| |
RS232 (4,5-wire B Type)  |
|
|
| |
| | | |
